Pin sizing question

[Drow1234]

What size pins are yall using with genza test c and tren e? Ive always used 23g 1.5" pins but ive seen several post where folks are talking about using insulin pins. I didnt think that would be possible due to the oil thickness. I have some dragon test e/eq blend and my 23g pins will barely draw it up because its so thick!

 

[Demigod]

25 gauge 1 inch right now...

 

[manwill67]

Use 20g pins to draw, then use 1" 25g or 23g to inject. 1/2" 27g works well if you're just pinning .5 to 1ml, especially if you use a 1ml barrel.

 

[dowork123]

I draw with a 18/20g and hit myself with a 25g. I’ll use a 27g if I’m pinning test base. I use both 1” and 1.5”.

 

[T swol]

I draw up what I need with a 20 gauge and back load slin pins. I haven’t used anything bigger in that last 3 years. I shoot daily

 

[pins]

I draw with an 18 gauge and inject with a 22 gauge.

 

[MorganKane]

I buy syringes with a 20g 1.5" needle then replace the needle with an 23/25g 1" needle.

 

[Xxplosive]

I only have 1 high dosed blend that doesn't squeeze through a 27g

 

[hypertrophyy]

slin pins ftw 27g unless front loading.

 

[liquid_c]

Used to use a 25g. Then I switched back to 23 due to long term use scar tissue. Can still use 25, just don't like having to push so hard and the shot taking much longer.

 

[jasmado]

Used to use a 25g. Then I switched back to 23 due to long term use scar tissue. Can still use 25, just don't like having to push so hard and the shot taking much longer.

Four minute shot haha

 

[manwill67]

Used to use a 25g. Then I switched back to 23 due to long term use scar tissue. Can still use 25, just don't like having to push so hard and the shot taking much longer.

Same here. I can still use 25g on ventro or quads, but otherwise use 23g. Lately, I've been thinking about trying 22g as even 23g is starting to take longer. For Xmas, my mom gave me an electric coffee cup warmer to set my coffee cup on. I'm thinking about setting my gear on there instead, and seeing if it makes pinning easier lol.

 

[Mack]

What size pins are yall using with genza test c and tren e? Ive always used 23g 1.5" pins but ive seen several post where folks are talking about using insulin pins. I didnt think that would be possible due to the oil thickness. I have some dragon test e/eq blend and my 23g pins will barely draw it up because its so thick!

That DP test e & EQ combo is a classic

I had a 10 pack of it years ago

I’d stick with an 18 g to draw then flip to a 23 g to inject and slam it in to the ventrogluteal

bro check out your muscle shop these guys have changed the entire online local experience and raised the bar German engineering too not china or India crap

 

[Mack]

1” pin

 

[PCTShopRep]

I've had luck using 'childrens' length IM needles,

 

[Bubba2.0]

23g x1"

I'm finishing up week 2 after 10 years away from the game. I'm realizing now that I previously used 1.5" and prefer the longer length, but I'll use these little guys until they're gone.

I don't believe SubQ is as effective in absorption... At least I haven't found concrete evidence to change my mind

 

[Mack]

I draw with an 18 gauge and inject with a 22 gauge.

Hardcore !!!!

 

[Mack]

That DP test e & EQ combo is a classic

I had a 10 pack of it years ago

I’d stick with an 18 g to draw then flip to a 23 g to inject and slam it in to the ventrogluteal

bro check out your muscle shop these guys have changed the entire online local experience and raised the bar German engineering too not china or India crap

Bump to the maximum ^^^^

 

[pins]

Hardcore !!!!

Everything flows so easy in a 22 gauge

 

[1977_Corvette]

Everything flows so easy in a 22 gauge

I just switched from 23 to 22 for some test400 & primo200 that’s thick oil. With a 23 it would constantly clog and i would have to re-pin, 22 it’s flows through in seconds, zero difference in pain soreness from the extra size.